Cursor vs Claude Code
By Mari Luukkainen · 7 min read · Last updated
On this page
- What is the main difference between Cursor and Claude Code?
- Prices and limits (checked 1 November 2026)
- What does a day with Cursor look like?
- What does a day with Claude Code look like?
- How do they handle mistakes?
- Can you use both?
- Which should you choose?
- A test you run in an hour
- Where does each tool lose time?
- Frequently asked questions
Cursor is an AI code editor where you watch each change appear in your files, and it also has an agent, cloud agents and a command line tool. Claude Code is Anthropic's agent: it takes a task, edits files, runs commands and shows the result. Choose Cursor to stay close to the code, Claude Code to hand over bigger tasks.
The old split of editor against terminal is blurrier than it was, so this comparison covers how each tool behaves in a working day, what each costs as of 1 November 2026, and how to use them together. Both tools are described in the tool overview. For the terminal side first, read what Claude Code is.
Ask AI about this pageChatGPTClaudePerplexityGoogle AI ModeGrok
What is the main difference between Cursor and Claude Code?
Where you work, and who drives. Cursor is a full code editor built on the same foundation as VS Code. You open your project, see the file tree and chat with the AI in a side panel. Its agent, opened with Cmd+I, edits code and runs terminal commands (docs). Claude Code started in the terminal: you type claude in your project folder and describe the task. It now also runs in VS Code (and Cursor), JetBrains, a desktop app and on the web (overview).
| Question | Cursor | Claude Code |
|---|---|---|
| Where do I work? | Inside Cursor's editor, or its command line tool (agent) | Terminal, VS Code or JetBrains extension, desktop app, web |
| How do I see changes? | Inline in the file, accept or reject | As a diff after the work, or step by step if you approve each action |
| Who runs the commands? | You, or the agent after you allow it | The agent, according to the permission mode |
| Work without me watching | Cloud agents run in cloud VMs and produce merge-ready pull requests | Cloud sessions push branches and can create pull requests |
| Project rules | .cursor/rules (.mdc files) and AGENTS.md | CLAUDE.md, or AGENTS.md when there is no CLAUDE.md |
| Typing help while you code | Yes, suggestions as you type | No, it is a task tool |
| Models | Grok models on Plus; others such as Claude billed by usage | Claude models |
Sources: Cursor cloud agents, Cursor CLI, Cursor rules, Claude Code cloud sessions.
Prices and limits (checked 1 November 2026)
| Plan | Price per month | What the vendor lists | Source |
|---|---|---|---|
| Cursor Free | $0 | Limited agent requests and limited chat requests | cursor.com/pricing |
| Cursor Plus | $8 | Shared usage pool, Grok models only | cursor.com/pricing |
| Cursor Premium | $30 | 4x Plus usage, cloud agents, third-party models billed at API list price | cursor.com/pricing |
| Cursor Super and Ultra | $100 and $200 | 15x and 50x Plus usage | cursor.com/pricing |
| Claude Pro | $20 ($17 billed annually) | 1x usage per 5 hours and per week, includes Claude Code | claude.com/pricing |
| Claude Max | $100 | 5x Pro usage, $100 in API credits | claude.com/pricing |
| Claude Ultra | $200 | No 5-hour limit, 10x Pro weekly usage, $200 in API credits | claude.com/pricing |
Cursor changed a lot in 2026. SpaceX agreed to buy it for $60 billion in stock in June, and Cursor announced the close on 14 August (GIGAZINE). It is now sold as part of The X Subscription with Grok. The Hobby, Pro and Pro+ names are gone from the pricing page, so any article quoting a $20 Cursor Pro plan is out of date. Cursor's FAQ says every tier includes a pool of usage shared across Cursor and Grok, and third-party models such as Claude are billed separately by usage. Claude Code does not come with the free Claude plan.
What does a day with Cursor look like?
You open the project, select a file or a block of code, and ask for a change. The edit appears in the file with the old and new lines marked. You accept, reject or ask for another try. Because you are in the editor, you fix small things by typing.
In the selected component, add an empty state for when the list has no items. Show the text "No recipes yet" and a button that opens the add form. Match the spacing of the other empty states in this project.Cursor is where I started. In March 2025 I used it to vibe code 12 websites in one weekend (post), and one prompt, "SEO the shit out of it", gave a minimal landing page titles, meta descriptions, Open Graph tags, alt text and some internal links. It also added outdated meta keyword stuffing (post). Reviewing in the editor is how you catch leftovers like that. The weak spot is attention: if you accept changes without reading, an editor makes it easy to accept many quickly.
What does a day with Claude Code look like?
You open a terminal in the project, start the tool and describe the whole task. It reads the files, proposes or starts a plan, edits several files and can run the tests and the build to check itself.
Add a settings page at /settings with fields for display name and email. Validate both on the server. Add the link to the main navigation. Write tests for the validation. Run the tests and the build and fix what fails. Do not change the existing pages other than the navigation.The strength is the amount of work between your messages. The weak spot is the review at the end: a task that touches eight files needs a careful diff read, and the tool can be wrong with confidence. Ask it to list what it changed and why, and read the diff in Git before you commit. My 2026 posts describe handing failures to Claude rather than fixing them by hand (post).
How do they handle mistakes?
- Claude Code keeps checkpoints of its file edits. Esc twice or /rewind restores code, the conversation or both, but changes made only by shell commands are not tracked (checkpointing).
- Git is the backup that covers everything. Commit before a task, then discard if the result is wrong.
- With both, a long session drifts. Start a new session for a new task.
Commit after every working round. The first project guide shows the prompt.
Can you use both?
Yes, and I do: I use both Cursor and Claude Code. There are three ways to combine them. Keep Cursor open as the editor and run Claude Code in a terminal next to it. Install the Claude Code extension for VS Code, which also works in Cursor. Or pick Claude models inside Cursor, billed by usage. The tools do not conflict as long as you do not ask both to edit the same files at the same moment. Commit between handing the folder from one to the other.
Both read AGENTS.md. Write your rules there once, and put the single line @AGENTS.md in CLAUDE.md so Claude Code imports the same file. Cursor's own rules in .cursor/rules need the .mdc extension.
- The stack is Next.js, TypeScript and Tailwind CSS. Do not suggest other frameworks.
- Components live in components/, one per file, named in PascalCase.
- Run npm test and npm run build after every change and show the output.
- Do not add dependencies without asking.
- Do not rewrite files you were not asked to change.A rule belongs in the file when you have typed it in three separate prompts.
Which should you choose?
| You are | Choose | Reason |
|---|---|---|
| Learning, and want to read the code as it appears | Cursor | Every change is in front of you, and there is a free plan |
| Making small, frequent edits to a design or text | Cursor | The loop is fast and local |
| Handing over a feature that touches many files | Claude Code | It plans, edits and checks without you in the loop |
| Comfortable in a terminal and with Git | Claude Code | The diff review is natural to you |
| Unsure | Try both on one task | Run the same small feature in a throwaway project |
Other options: Claude Code alternatives, and the comparisons with Codex and GitHub Copilot.
A test you run in an hour
I have not run this test; it is for you.
- Make an empty project and commit it.
- Give Cursor this task: "Add a dark mode toggle that remembers the choice." Time it, and note how many times you had to step in.
- Discard everything with Git.
- Give the identical prompt to Claude Code. Time it, and note the same.
- Compare the diffs. Which one would you merge without changes?
Where does each tool lose time?
| Situation | Cursor | Claude Code |
|---|---|---|
| You do not know the codebase | Ask questions in the chat panel with files attached | Ask it to read the project and summarise before you change anything |
| A change spans many files | You step through edit after edit | You wait, then read one diff |
| A tiny edit to a heading | Fast: select, ask, accept | Slow: starting a task for one word |
| The tool goes down the wrong path | You see it in the first edit and reject it | You see it after the run, unless you asked for a plan first |
| A long task over an hour | Tied to the screen unless you use a cloud agent | You can do something else, or use a cloud session |
Frequently asked questions
Does Cursor use Claude models?
Yes, but Cursor's Plus plan includes Grok models only. Third-party models such as Claude are billed separately by usage, at API list price on the Premium plan. Claude Code uses your Claude plan instead.
Can I run Claude Code inside Cursor?
Yes. Claude Code has an extension for VS Code that also works in Cursor.
Who owns Cursor now?
SpaceX. Engadget reported on 16 June 2026 that SpaceX agreed to buy Cursor for $60 billion in stock, and Cursor announced the close on 14 August 2026.
Can Cursor work on a task while I am away?
Yes. Cloud agents, formerly called Background Agents, run in cloud virtual machines and produce merge-ready pull requests. Cursor lists cloud agents on the Premium plan.
Next guideCursor vs Windsurf →